JT files are used by a lightweight CAD type of 3D modeling software. The format was developed by Siemens PLM Software. JT files hold coordinate data, NURBS surfaces, non-geometrical data, and metadata.
After converting the file to the new format, you will be able to use other programs to support it. Keep in mind, however, that the JT file after converting to CATPRODUCT may differ slightly from the original. The most important information should be kept, but if you want the file after conversion from JT to CATPRODUCT to be the same, you have to do this carefully and choose the proper application from the list below.
There is no guarantee, of course, that the conversion will come up to all your expectations, but it will certainly help you. If, after all, the effect of converting JT to CATPRODUCT does not meet your expectations, you can simply try to find on the Internet a different version of your file in JT format, properly converted to a CATPRODUCT file by someone else. If this fails, use the information provided in the further part of the website.
If after converting the file JT the desired result was not achieved, you can try to change the format of JT file to other than CATPRODUCT. On our website you will find more information on the following conversion options
Unfortunately, if after performing the two previously described steps (trying to find your JT file converted by someone else, and the attempt to convert it to CATPRODUCT on your own) you still have a problem with your file, then there are only a few solutions left. You can once again try to find and install an application that can open the JT file in its original format (without conversion to CATPRODUCT file). Such a solution will be difficult to implement, but it certainly will give the best result.