PLY is a 3D image file format. PLY (Polygon File Format or Stanford Triangle Format) standard was developed at Stanford University. It was created as a means of storing simple 3D data collected using a 3D scanning device.
After converting the file to the new format, you will be able to use other programs to support it. Keep in mind, however, that the PLY file after converting to PTS may differ slightly from the original. The most important information should be kept, but if you want the file after conversion from PLY to PTS to be the same, you have to do this carefully and choose the proper application from the list below.
There is no guarantee, of course, that the conversion will come up to all your expectations, but it will certainly help you. If, after all, the effect of converting PLY to PTS does not meet your expectations, you can simply try to find on the Internet a different version of your file in PLY format, properly converted to a PTS file by someone else. If this fails, use the information provided in the further part of the website.
If after converting the file PLY the desired result was not achieved, you can try to change the format of PLY file to other than PTS. On our website you will find more information on the following conversion options
Unfortunately, if after performing the two previously described steps (trying to find your PLY file converted by someone else, and the attempt to convert it to PTS on your own) you still have a problem with your file, then there are only a few solutions left. You can once again try to find and install an application that can open the PLY file in its original format (without conversion to PTS file). Such a solution will be difficult to implement, but it certainly will give the best result.