File Conversion STL to TCW
Stereolithography File
-
DeveloperN/A
-
Category
STL is a generic file format for storing 3D and CAD data created by 3D Systems, a 3D printing technology called stereolitography. STL file stores 3D object data in text or binary format.
TurboCAD Drawing File
-
DeveloperIMSI/Design
-
Category
Files with the TCW extension store two-dimensional or three-dimensional vector graphics in a proprietary format. It is specific to the TurboCAD software, where the TCW format is reserved for the program in the Windows operating system environment.
How to convert APK to PUB?
After converting the file to the new format, you will be able to use other programs to support it. Keep in mind, however, that the STL file after converting to TCW may differ slightly from the original. The most important information should be kept, but if you want the file after conversion from STL to TCW to be the same, you have to do this carefully and choose the proper application from the list below.
There is no guarantee, of course, that the conversion will come up to all your expectations, but it will certainly help you. If, after all, the effect of converting STL to TCW does not meet your expectations, you can simply try to find on the Internet a different version of your file in STL format, properly converted to a TCW file by someone else. If this fails, use the information provided in the further part of the website.
Programs to convert STL to TCW:
Other possible STL file conversions
If after converting the file STL the desired result was not achieved, you can try to change the format of STL file to other than TCW. On our website you will find more information on the following conversion options
File Conversions from STL extension to a different format
- STL to 3DXML
- STL to AC
- STL to ASC
- STL to ASS
- STL to C4D
- STL to CATPART
- STL to CATPRODUCT
- STL to CGR
- STL to DGN
- STL to DWG
- STL to DXF
- STL to EASM
- STL to EPS
- STL to FCSTD
- STL to GBR
- STL to IAM
- STL to IDW
- STL to IGES
- STL to IGS
- STL to IPT
- STL to IV
- STL to JPEG
- STL to JSON
- STL to JT
- STL to KMZ
- STL to LWO
- STL to LXO
- STL to MAX
- STL to OFF
- STL to PDO
- STL to PLY
- STL to PNG
- STL to PRT
- STL to PTS
- STL to SAB
- STL to SAT
- STL to SCAD
- STL to SKP
- STL to SLDASM
- STL to SLDPRT
- STL to SSA
- STL to OBJ
- STL to STP
- STL to U3D
- STL to VRML
- STL to W32
- STL to WRL
- STL to XML
- STL to X_B
- STL to X_T
- STL to XGL
- STL to LWOB
- STL to EPRT
- STL to A3S
- STL to BREP
- STL to CATDRAWING
- STL to A3D
- STL to GERBER
- STL to 3DS
- STL to DAE
- STL to JPG
- STL to PDF
- STL to SRT
- STL to STEP
- STL to FBX
- STL to GLB
- STL to BDF
What can I also do?
Unfortunately, if after performing the two previously described steps (trying to find your STL file converted by someone else, and the attempt to convert it to TCW on your own) you still have a problem with your file, then there are only a few solutions left. You can once again try to find and install an application that can open the STL file in its original format (without conversion to TCW file). Such a solution will be difficult to implement, but it certainly will give the best result.
File Extension of the day
002
Compressed Format From A Multi-volume Archive (part 2)
Files with the 002 extension are generated by various archiving and compression tools. In case of this extension, it concerns an archive comprised ...