File Conversion STP to CATPART
STEP 3D CAD File
-
DeveloperN/A
-
Category
STP file contains 3D object project saved in STEP (Standard for the Exchange of Product Data) format. STP format is similar to less frequently used STEP format. STP is a ASCII text file that conforms to ISO 10303-11 standard specification, sometimes referred to as EXPRESS.
CATIA V5 Part File
-
DeveloperDassault Systemes
-
Category
Files with .CATPART extension contain 3D CAD/CAM/CAE model parts and structured data associated with them. CATPART files are saved in a proprietary format developed by CATIA. CATPART files constitute a larger project or a functional element of such project created using CATIA V5.
How to convert APK to PUB?
After converting the file to the new format, you will be able to use other programs to support it. Keep in mind, however, that the STP file after converting to CATPART may differ slightly from the original. The most important information should be kept, but if you want the file after conversion from STP to CATPART to be the same, you have to do this carefully and choose the proper application from the list below.
There is no guarantee, of course, that the conversion will come up to all your expectations, but it will certainly help you. If, after all, the effect of converting STP to CATPART does not meet your expectations, you can simply try to find on the Internet a different version of your file in STP format, properly converted to a CATPART file by someone else. If this fails, use the information provided in the further part of the website.
Programs to convert STP to CATPART:
Other possible STP file conversions
If after converting the file STP the desired result was not achieved, you can try to change the format of STP file to other than CATPART. On our website you will find more information on the following conversion options
File Conversions from STP extension to a different format
- STP to BIP
- STP to CAD
- STP to CATPRODUCT
- STP to CGR
- STP to DAE
- STP to DFT
- STP to DWF
- STP to DWG
- STP to DXF
- STP to EASM
- STP to EDRW
- STP to FBX
- STP to FCSTD
- STP to IAM
- STP to IDW
- STP to IFC
- STP to IGS
- STP to IPJ
- STP to IPN
- STP to IPT
- STP to IV
- STP to JT
- STP to LWO
- STP to MA
- STP to MB
- STP to MODEL
- STP to OBJ
- STP to PRT
- STP to SAT
- STP to SLDASM
- STP to SLDDRW
- STP to SLDPRT
- STP to STL
- STP to 3DS
- STP to PDF
- STP to SKP
- STP to SVG
- STP to TCW
- STP to U3D
- STP to VDA
- STP to VRL
- STP to VRML
- STP to WRL
- STP to X_B
- STP to X_T
- STP to 3D
- STP to 3DXML
- STP to NC1
- STP to XGL
- STP to EPRT
- STP to A3S
- STP to AD_PRT
- STP to A3D
- STP to JPG
- STP to PNG
- STP to XLS
- STP to ASC
- STP to IGES
- STP to ICS
What can I also do?
Unfortunately, if after performing the two previously described steps (trying to find your STP file converted by someone else, and the attempt to convert it to CATPART on your own) you still have a problem with your file, then there are only a few solutions left. You can once again try to find and install an application that can open the STP file in its original format (without conversion to CATPART file). Such a solution will be difficult to implement, but it certainly will give the best result.
File Extension of the day
EML
E-Mail Message
Files with the .EML extension contain a single email stored in a single file comprised of the header of the message and its body, and possibly some...